Page last updated Jul 7, 2025 @ 10:06pm

APM Air Diversion Loads

APM-ADL1.jpg (94587 bytes) APM-ADL7.jpg (92369 bytes) APM-ADL-EL.jpg (56876 bytes)
low Watts
single resistor
high Watts
7 resistors
high Watts
wide orientation

click thumbnail image above to enlarge

 

Introduction

Diversion loads are used to dissipate extra electricity from wind and hydroelectric turbines to prevent overcharging batteries and over-speed conditions.  Use the following formulas to compute and convert the electrical parameters.

     To calculate current:   Amps = Volts ÷ Ohms

     To calculate power:     Watts = Volts x Volts ÷ Ohms

                                     Watts = Volts x Amps

Do not exceed maximum rated Wattages.

 

APM Enclosed Versions - 12/24/48V

These resistive loads are built to operate at 100% duty cycle in a 50° C ambient without a cooling fan at the rated Watts at the usual equalization voltage commonly found in lead acid battery-based systems. At normal charging Voltage the Amperage will be 5-10% less and the Watt dissipated will be 10-15% lower. Oversize the unit a little (125% of the potential power source) when using the load unit for hydro, wind, or solar diversion.

Mounting must be on a suitable fireproof vertical support for height and width, with other fireproofing materials as needed. It should be at least 12" from any flammable material. It must also be kept free and clear of combustible materials and falling debris. This is the user's responsibility! These units can be a significant source of heat and could be dangerous in the wrong hands. This is an industrial grade product and is not UL Listed.

CAUTION: These heaters should be checked annually for bad or burnt connections resulting in excessive heat from loose wires or incorrectly set systems. If not correctly set, generator power could be diverted into the heater. Look for burnt, discolored wires or broken resistors. 

 

12Vdc nominal enclosed air diversion load


Item Number: APM-ADL12
Price: $202
Price last updated 7/7/2025
Shipping Weight: 10 lbs.
This item normally ships in approximately 1 week or less.
.
24Vdc nominal enclosed air diversion load


Item Number: APM-ADL24
Price: $202
Price last updated 7/7/2025
Shipping Weight: 10 lbs.
This item normally ships in approximately 1 week or less.
.
48Vdc nominal enclosed air diversion load


Item Number: APM-ADL48
Price: $202
Price last updated 7/7/2025
Shipping Weight: 10 lbs.
This item normally ships in approximately 1 week or less.

 

The following part numbers can be ordered using the above buttons:

12Vdc nominal 24Vdc nominal 48Vdc nominal
AL-1
FL-1
AL-3
FL-3
AL-7
FL-7
AL-11
FL-11
BL-2
BL-4
BL-5
BL-6
AL-17
DL-17
FL-17
AL-21
FL-21
AL-19
DL-19
FL-19
DL-23
FL-23
AL-45
FL-45
AL-27
DL-27
FL-27
AL-47
AL-29
EL-29
BL-55
AL-31
EL-31
AL-53
AL-57
CL-68
AL-33
DL-33
FL-33
AL-35
DL-35
FL-35
AL-39
DL-39
FL-39
AL-43
DL-43
FL-43
AL-46
BL-46
EL-46
AL-48
BL-48
EL-48
AL-49
BL-49
AL-50
BL-50
AL-51
AL-52
BL-52
CL-52
BL-41
BL-42
CL-42

 

 

Are YOU ready for the next power outage?

 1 Videos
 2 Outage Archives
 3 Utility Industry
 4 Why You Need Backup
 5 Personal Stories
 6 NoOutage Configurations
 7 Safety
 8 Sizing for Your Needs
 9 Voltage Drop Calculator
10 Test Reports
11 Placing Order
12 Equipment Leasing
13 Books & Videos  
14 Financing
15 Frequently Asked
16 Future Technologies
17 Electricity Glossary
18 Help with Plug Types
19 Who We Are
20 Why Buy Here
21 Our Customers
22 Pick a Contractor
23 Privacy Promise
24 Safe Shopping Guarantee
25 Terms & Conditions
26 What's New
27 Contacting Us
28 Parts Lookup
29 Parts & Service
30 Made in USA
31 Links

We welcome your feedback or questions.  Click here to contact us.
See our Terms & Conditions before using information or ordering from this web site.
Copyright © 1999-2025 NoOutage.com LLC. A Virginia LLC. All rights reserved.