Page last updated Oct 20, 2021 @ 10:10pm

PRESSURE GAUGE

Pressure Gauge

It is a good idea to install a pressure gauge at the turbine, before the shutoff valve, so that the gauge reads if the valve is on or off.  This will allow you to read static pressure with the valve off and dynamic pressure with the valve on.  It will be a great help in troubleshooting.  Remember, there are 0.433 psi per foot of head.  Order a pressure gauge that is high enough to read full pressure in your pipeline.  Dial size 2 inches.  Fits 1/4 inch NPT pipe thread.

Specify maximum gauge pressure below when ordering.

 

 

Select pressure range... 0-30psi 0-60psi 0-100psi 0-160psi 0-200psi 0-300psi
Select dampening... air filled, no dampening for vibration glycerine filled, dampens vibrations (add $10)

Item Number: PRESSGAUGE
Price: $20
Price last updated 4/29/2010
Shipping Weight: 1 lbs.
This item normally ships in approximately 1 week or less.

 

Are YOU ready for the next power outage?

1 Videos  2 Outage Archives  3 Utility Industry  4 Why You Need Backup  5 Personal Stories

6 NoOutage Configurations  7 Safety  8 Sizing for Your Needs  9 Voltage Drop Calculator 10 Test Reports

11 Placing Order 12 Equipment Leasing 13 Books & Videos   14 Financing 15 Frequently Asked

16 Future Technologies 17 Electricity Glossary 18 Help with Plug Types 19 Who We Are 20 Why Buy Here

21 Our Customers 22 Pick a Contractor 23 Privacy Promise 24 Safe Shopping Guarantee 25 Terms & Conditions

26 What's New 27 Contacting Us 28 Parts Lookup 29 Parts & Service 30 Made in USA 31 Links

We welcome your feedback or questions.  Click here to contact us.
See our Terms & Conditions before using information or ordering from this web site.
Copyright © 1999-2025 NoOutage.com LLC. A Virginia LLC. All rights reserved.