Page last updated Mar 24, 2025 @ 10:20pm
Automatic Transfer Switches - 3 Phase
Click above to check phone pricing
These switches are for use with 3 phase (or single phase) automatic standby generators of many standard voltages and include many adjustments and features not available on the single phase switches above. These should be installed by a qualified electrician or electrical contractor. Local permits may be required.
Remember that the transfer switch current rating must be at least high enough to carry full rated load of
your generator. It also must match or exceed the current rating of the upstream breaker or fuse protection
that will supply normal utility power. Most jurisdictions do not require the transfer device to switch the
neutral. Therefore these prices do not include the extra pole for that purpose. If your local codes or
application requires the neutral to be switched contact us for a special quote. We can also provide
custom enclosures to house these switches if you have harsh environments.
![]() |
Description |
Works with | Price |
ATC3C2X30100 | Automatic Transfer Switch - Eaton Cutler-Hammer, 100 amp, 3 phase, exerciser | any automatic standby generator with 2
wire start control standard pricing: optional adders/deducts for: |
$2,267 |
ATC3C2X30200 | Automatic Transfer Switch - Eaton Cutler-Hammer, 200 amp, 3 phase, exerciser | $2,932 | |
ATC3C2X30225 | Automatic Transfer Switch - Eaton Cutler-Hammer, 225 amp, 3 phase, exerciser | $3,407 | |
ATC3C2X30260 | Automatic Transfer Switch - Eaton Cutler-Hammer, 260 amp, 3 phase, exerciser | $3,600 | |
ATC3C2X3020 | Automatic Transfer Switch - Eaton Cutler-Hammer, 320 amp, 3 phase, exerciser DISCONTINUED MODEL | ? | |
ATC3C2X30400 | Automatic Transfer Switch - Eaton Cutler-Hammer, 400 amp, 3 phase, exerciser | $4,211 | |
ATC3C2X30600 | Automatic Transfer Switch - Eaton Cutler-Hammer, 600 amp, 3 phase, exerciser | $8,028 | |
ATS40032 ATS40034 ATS40032SE ATS40034SE |
Automatic Transfer Switch - Ronk, 400 amp, exerciser, optional service entrance disconnect | any automatic standby generator with 2
wire start control (NOT for delta power systems) standard pricing: NEMA 4 indoor/outdoor enclosure 3 phase 3 pole generator exerciser 2 year warranty |
$5,376
free freight |
ATS60032 ATS60034 |
Automatic Transfer Switch - Ronk, 600 amp, exerciser | ? | |
OTEC125 | Automatic Transfer Switch -Cummins® 125A with exerciser and charger | any automatic standby generator with 2
wire start control optional adders for: outdoor 3R enclosure battery charger single phase 2 pole service entrance rated 5 year warranty |
$1,864
free freight |
OTEC225 | Automatic Transfer Switch -Cummins® 225A with PowerCommand40 control | $2,658
free freight |
|
OTEC400 | Automatic Transfer Switch -Cummins® 400A with PowerCommand40 control | $3,402
free freight |
|
OTEC600 | Automatic Transfer Switch -Cummins® 600A with PowerCommand40 control | $6,040
free freight |
|
ZXOB3 to ZXOK3 |
Automatic Transfer Switch - ABB Zenith ZTX, 60 Amp, 3 phase, exerciser | any automatic standby generator with 2
wire start control standard pricing: optional adders for:
|
discontinued and replaced by ZGO below |
ZGOB3 to ZGOK3 |
Automatic Transfer Switch - ABB Zenith ZTG, 100 Amp, 3 phase, exerciser | $3,550 |
Are YOU ready for the next power outage?
We welcome your feedback or questions. Click here to contact us.
See our Terms & Conditions before using information or
ordering from this web site.
Copyright © 1999-2025 NoOutage.com LLC. A Virginia LLC. All rights reserved.